Garage Door Opener Issues That Need Repair Instantly

Garage door problems are a very common thing now. Many people often complain that even if they have installed a technically advanced garage door, it shows some issues someway or the other. Therefore, garage door services are in demand always. There are certain problems that are common to almost every customer. Although these problems are reparable, it can give the customers immense irritation and frustration unless the repair work is completed. Read on to learn the common problems of a garage door.

Common Garage Door Issues

Garage door openers or closing can have problems often. At that time, you may look for a garage door opener repair service to get your job done. Some of the basic problems of a garage door are discussed below.

·         Your Garage Door Doesn’t Open with Remote or Wall Switch

A garage door opener may create problems sometimes. You can notice that your door refuses to open with a remote control or even from the wall switch. The common reasons can be an unplugged motor unit, a broken motor, burnout or anything that should be repaired to ensure normal door functioning.

·         Keypad or Remote-Control Operations Is Disrupted

If you are unable to operate the garage door with your keypad or remote control, then there can be certain reasons behind it. You should check whether the battery is dead, the antenna is damaged, your remote or keypad needs a reset, or you are far away from the door that the connection is not established. If none of the discussed points are true, you need to call for a repair service to check for the actual issue.

·         Your Garage Door is Not Closing Completely

Sometimes, your garage door stops closing at the middle of the process and get stuck. It may happen if there is a block in between the process. To ensure that, you need to check your safety sensors. The electronic eyes near the bottom of the door track should be present. If a clear-line-sight in between is disrupted, your garage door won’t work properly.

·         The Door Opens Again After Reaching the Floor

If your garage door is reversing even after hitting the floor, there is a possibility that the close-force setting is defective. The setting is needed to determine the force that is applied while closing the door. If the settings have any problem, then the door can reverse.

·         The Motor Doesn’t Stop Even After Closing the Door

Once the door is closed, the motor should stop immediately. But, if you notice that it is still running, there is a problem in your system for sure. However, this type of problem can be fixed if you call an expert. Visit Windsor Garage Door Service for repairing any issue related to the door.